All you need to know is your location. If the tracker is stationary, of course, then the accepted transmission intervals for stationary targets applies typically minutes, depending on the purpose of the tracker. Secondarily, I figured I'd use it in the car on occasion. There is no explaining that away and the FCC will come down hard. Note that the configuration depicted is just the default. There are presently two main frequencies dedicated to APRS work:
Myrna. Age: 19. +33752961935
Cory. Age: 20. My name is Larissa and I am a refined and sensual paramour
Automatic Packet Reporting System
If you can find a Garmin NUVI , you can put a dedicated APRS system together for a few hundred bucks and leave your dual-band for dual-band activities x-band repeat, dual watch, etc. If you want to do x-band repeat, you'll have to give up APRS. It can be used to control a Kenwood TS through Skycommand. Contact the site with comments or questions. It has power and was the first system purchased before we tried less expensive configurations. It took me several hours of experimentation to discover the syntax for typing some of the commands into the TNC are different from the way they list when you display them!
Then I use an HT for local simplex. Third part is tracking. Without a repeater, high power radios are required and you will still have limited capabilities. The menus are thoughtfully done, and the stuff you need to have right at your fingertips have "shortcuts" built right in. As the president of my offroad club there is a level of ethics required above the normal offroader.
Helly. Age: 29. .cheyenne
Kenwood VHF/UHF FM Mobile Transceiver sales, RadioWorld uk
Fix it usually at the transmitter if you want to be seen. Join the Hamradio International Group on Facebook. See Southern and Northern Europe progress. You might see a repeater, shown by a blue antenna tower symbol. Android phone users have a very basic tracker application called APRSdroid.